Cabletron Systems CSX400 User Manual
Page 66
CSX WAN Configuration
4-2
Accessing the CSX WAN Configuration Window
from the command line (stand-alone mode)
1.
From the appropriate directory type:
spmarun wancon
The WAN ConÞguration window will appear.
shows a WAN
ConÞguration window for a CSX400 that has two WPIM-T1s installed.
NOTES
The spmarun script invoked Þrst in the above command temporarily sets the environment
variables SPMA needs to operate; be sure to use this command any time you launch an
application from the command line. This script is automatically invoked when you launch
the application from the icon menu.
If you wish to change the conÞguration, be sure to use a community name with at least
Read/Write access. If you only wish to view current settings, a community name with
Read access will be sufÞcient.
If there is a hostname mapped to your CSXÕs IP address, you can use
of
the same as the device name which can be assigned via Local Management and/or SPMA;
you cannot use the device name in place of the IP address.