Welch Allyn SureTemp PlusModule - User Manual - Manual (Page 23)

SureTemp Plus Module OEM Implementation OEM Implementation
Welch Allyn OEM Technologies Confidential 23
Ready Audible Signal
Provide an audible indication to show that the probe is ready. The unit should beep once for 200
ms when the probe is ready to be inserted into the temperature-taking site. The system should
beep the first time the READY state is returned from the module in the state field in the TEMP
packet.
In-Progress Indicator
Provide an indication to show that the predict cycle is in progress. (Display the in-process
indicator only while the SureTemp state is Predict Display.)
The preferred indicator is a Walking Segments display (Figure 10) in the handheld device.
Figure 10. Walking Segments (In-Process Indicator)
In the tenths digit on the thermometer display, the dark bar travels through the segments when
the thermometer is in the process of taking a temperature.
An alternative method such as showing a set of moving dots similar to a Windows boot screen is
acceptable.
Completion Audible Signal
Provide an indication to show that the predict cycle is finished.
The unit should beep three times, with a 100-ms delay between beeps, when the final
temperature is reached, indicating completion of the predict temperature. This is communicated
when the state field in the TEMP packet is identified as FINAL.