Welch Allyn SureTemp PlusModule - User Manual - Manual (Page 17)

SureTemp Plus Module OEM Implementation OEM Implementation
Welch Allyn OEM Technologies Confidential 17
Figure 3. State Diagram: Predict
Probe pulled;
Start Predict
Algorithm ran 1
or many cycles;
Active = 1
Algorithm determined that
probe tip is at desired temperature;
Signal Ready beep;
Initialize the in-progress indicator No Predict
Idle
Monitor
No
Predict
Predict
Display
Final X
Not Ready
Ready
Predict
Predict
Position
Predict complete;
Display result
Algorithm time-out
Predict in progress;
Increment and display
the in-progress indicator
Predict started;
Reset the in-progress
indicator
Algorithm reset;
Start over
Tissue contact regained;
Reset the in-progress indicator
Tissue contact lost;
Display the out-of-position indicator
Algorithm not active;
Terminate the temperature cycle
Switch to Monitor mode
Algorithm reset;
Start over
(Algorithm Status = Final) & Active;
Display the temperature
FINAL
FINAL_OVER_TEMP
FINAL_OVER_TEMP_POSITION
FINAL_UNDER_TEMP
FINAL_UNDER_TEMP_POSITION
FINAL_POSITION
Display Predict Complete Temperature.
Do not show the result; indicate over-temperature.
Do not show the result; indicate under-temperature.
Show the final temperature with an out-of-position indication.
Final states:
Algorithm time-out