Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 97)

Function restrictions
You will not yet be able to use the telephone
in the following situations:
R when the mobile phone is not yet
connected to a network The telephone
automatically attempts to log into a
network. If no network is available, you will
not be able to make a "911" emergency
call. If you attempt to make an outgoing
call, the No Service message will appear
for a short while.
911 emergency call
G Warning
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following conditions must be fulfilled in
order to make a 911 emergency call:
R the mobile phone must be switched on.
R a network must be available.
R a valid and operational SIM card must be
inserted in the mobile phone.
R the mobile phone must be connected to
COMAND via the Bluetooth ® interface
If you cannot make an emergency call, you
must arrange rescue measures yourself.
X
Enter the number using COMAND.
X Press the 6 button.
The telephone makes the connection.
X
Wait until the emergency call center
answers and describe the emergency
situation.
Telephony via the Bluetooth ®
interface
Conditions
Mobile phone
For telephony via COMAND's Bluetooth ®
interface, a Bluetooth ® -capable mobile
phone is required.
i Not all mobile phones available on the
market are equally suitable. For more
information on suitable mobile phones and
on connecting Bluetooth ® -capable mobile
phones to COMAND, visit
http://www.mbusa-mobile.com or call
the Mercedes-Benz Customer Assistance
Center under
1-800-FOR-MERCedes(1-800-367-6372)
(US) or Customer Relations under
1-800-387-0100 (Canada).
The battery of the mobile phone should be
kept sufficiently charged in order to prevent
malfunctions.
In preparation for telephoning via the
Bluetooth ® interface, you should check the
following items on your mobile phone (see the
mobile phone operating instructions):
X Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
i Some displays (e.g. the signal strength)
depend on the supported version of the
Hands-Free Profile.
X Bluetooth ® visibility
On certain mobile phones, the device itself
must be made "visible" for other devices,
as well as activating the Bluetooth ®
function (see the mobile phone operating
instructions).
X Bluetooth ® device name
Every Bluetooth ® device has its own
Bluetooth ® device name. This device name
is freely definable, but can be identical for
all devices from the same manufacturer. It
Telephony via the Bluetooth ® interface 95
Telephone
Z