Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 29)

: Cursor (repositioned)
; 2 and 3 icon to reposition the cursor
X Delete the character/entry (
Y
page 24).
Saving the entry
X
Select the ¬ icon using the =;
9: buttons and press the 9 button
to confirm.
The entry is stored in the address book.
Basic functions of COMAND
Switching COMAND on/off
X Turn or press the q control knob.
A warning message appears. COMAND
calls up the previously selected menu.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
Switching the COMAND display on/
off
X
Press the W function button.
or
X Select System in the main function bar
using the 9=; buttons and
press the 9 button to confirm.
In both cases, the system menu appears.
X To switch off: select Display Off and
press the 9 button to confirm.
X
To switch on: press the q or % back
button.
Muting
Switching an audio and video source
on/off
X Press the 8 button.
The sound from the respective audio or
video source is switched on or muted.
i When the sound is off, the system
displays the , icon in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i You will still hear traffic announcements
and navigation system announcements,
even if the sound is muted.
Switching off Traffic Program and
navigation announcements completely
X Traffic Program: press and hold the
8 button until the . display
disappears from the status bar of the
display.
X Navigation announcements: press the
8 button during the announcement.
i Navigation announcements can be turned
on again after COMAND has been switched
on or off with the q control knob.
Adjusting the volume
Audio and video source volume
X
Turn or press the q control knob.
or
X Press the W or X button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
Basic functions of COMAND
27
At
a
glance
Z