Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 53)

X Select No. in the address entry menu using
the =;9: buttons and
press the 9 button to confirm.
You will see the house number list either
with the character bar (option 1) or as a
selection list (option 2).
Option 1: house number list with
character bar
X Enter 1 . Instructions for entering
characters can be found in the "Entering
characters in navigation mode (entering a
city)" section (
Y
page 22).
: Entry most closely resembling the
characters entered so far
; List
= Character bar
Option 2: house number list as selection
list
House number list
X
Press the 9 or : button repeatedly
until 1 is selected.
X Irrespective of the option, press the 9
button to confirm your selection.
The address entry menu appears again. 1
has now been entered.
Starting route calculation
You can now have COMAND calculate the
route to the address entered or save the
address first, e.g. as your home address (My
address) (
Y
page 52).
Address entry menu with destination address
:
Destination address
; To start route calculation
X In the address entry menu, confirm Start
by pressing the 9 button.
If no other route has been calculated, route
calculation starts immediately (Option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
Option 1 – no route guidance active: route
calculation starts. While route calculation is
in progress, an arrow will indicate the
direction to your destination. Below this, you
will see the message Calculating Route ,
for example.
Once the route has been calculated, route
guidance begins. If the vehicle is traveling on
a non-digitized road, the linear distance to the
destination is shown. In this case, the display
will be grayed out.
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
Destination entry
51
Navigat
ion
system
Z