Navi ga tio n sy ste m, Entering a point of interest – Mercedes-Benz CLS-Class 2011 COMAND Manual User Manual
Page 65
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
R
vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
R
vicinity of destination: the linear distance
is the distance of the point of interest
from the destination entered.
Long names of points of interest are
abbreviated. An information icon is shown
after the entry.
X
To call up the complete display: press
the ; button.
Selecting a point of interest
X
Select a point of interest using the
9: buttons and press the 9 button
to confirm.
The full address of the point of interest
selected appears.
:
Point of interest with address
;
To start route calculation
=
To store an address in the destination
memory
?
To display details
A
To make a call (when available)
B
To cancel selection
C
To show an address on the map
X
To start route calculation: select
Start
and press the 9 button to confirm.
X
To store an address in the destination
memory: select
Save
and press the 9
button to confirm. You can now select
storage options (
Y
page 79).
X
To show the detailed view: select
Details
and press the 9 button to
confirm.
X
To connect a call: select
Call
and press
the 9 button to confirm (available if the
point of interest entry contains a phone
number).
X
To call up the map: select
Map
and press
the 9 button to confirm.
X
You can scroll the map and select a
destination (
Y
page 56).
ZAGAT
®
rating service
Entries featuring the Z icon contain additional
ZAGAT information. ZAGAT rates restaurants,
for instance, in regard to the quality of the
food, furnishing, service, and provides an
average pricing level as well as a general
description.
After selecting an entry with a Z icon, you can
call up the ZAGAT rating in the subsequent
screen.
Entering a point of interest
63
Navi
ga
tio
n
sy
ste
m
Z