Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 71)

directions may cause you to divert your
attention from driving and increase your risk
of an accident.
Repeating navigation announcements
i Audible navigation announcements are
muted during a telephone call.
If you have missed an announcement, you can
call up the current announcement at any
time.
X To show the menu: press the Ø
function button.
X Select + in the navigation menu bar using
the :=; buttons and press the
9 button to confirm.
Switching navigation announcements
on/off
X
To switch off: press the 8 button
during an announcement.
You will briefly see the message: The
driving instructions have been
muted .
X To switch on: press the Ø function
button.
X
Select + in the navigation menu bar using
the :=; buttons and press the
9 button to confirm.
i COMAND automatically switches the
navigation announcements back on when:
R it receives RDS-TMC traffic reports
during dynamic route guidance and
recalculates the route accordingly
(
Y
page 51).
R you have a new route calculated.
R you switch COMAND back on again or
start the engine.
Reducing volume during a navigation
announcement
The volume of an active radio of video source
can be automatically reduced during a
navigation announcement.
X Select Navi in the main menu bar using the
9=; buttons and press the 9
button to confirm.
X Select Audio Fadeout and press the 9
button to confirm.
The function is switched on O or off ª,
depending on the previous status.
Setting the volume manually
X
Adjust the volume using the q control
knob during a navigation announcement.
or
X
Select + in the map view with the menu
shown and adjust the volume using the
q control knob.
Navigation system displays in the
multifunction display
Calling up the navigation system menu
X Press the V or U button repeatedly
until Navi appears in the display.
The view in the multifunction display depends
on whether route guidance is active or not.
Route guidance is inactive: the direction of
travel and, if known, the name of the road you
are currently traveling along are shown in the
multifunction display.
Route guidance is active: the display in the
multifunction display depends on whether a
change of direction is announced or not.
When a change of direction is announced, you
see an icon for the change and a visual
representation of the distance. The distance
indicator shortens towards the top of the
display as you approach the point of the
announced change of direction.
Route guidance
69
Na
vigation
system
Z