Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 161)

Audio/video socket
:
Video port (V)
; Audio port (L)
= Audio port (R)
i To facilitate correct playback, it may be
necessary to set a suitable video standard
in the external video source.
X Connect the external device to
corresponding port :, ; or =.
COMAND activates the device.
Switching on video AUX mode
X Select Video in the main function bar using
the 9=; buttons and press the
9 button to confirm.
If video AUX mode was the last mode
selected, it will now be active.
If another video source is switched on, you
can now switch to video AUX mode in the
video menu.
X Select Video and press the 9 button to
confirm.
X Select Aux and press the 9 button to
confirm.
The video AUX menu appears. You will hear
and see the content of the external video
source if this is connected and switched to
playback.
Video AUX mode
For details on how to operate the external
video source, see the respective device's
operating instructions.
External video sources may have different
audio output volume. You can select two
different input volume levels for the AUX
connection:
R Standard
External sources with a medium to high
audio output volume.
R Boost
External sources with a low audio output
volume.
X
Setting the desired input volume:
Select
Volume using the
9:=; buttons and press
the 9 button to confirm.
X Select Standard or Boost and press the
9 button to confirm.
Video AUX operation
159
Video
Z