Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 102)

X Select Reception Volume or
Transmission Volume and press the 9
button to confirm.
X Select a volume setting using the
9: buttons.
X
To close the scale: press the 9 or =
button.
Telephone operation
Incoming call
Rejecting or accepting a call
When there is an incoming call, you see a
corresponding window in the display.
X To reject: select Reject using the =
button and press the 9 button to confirm.
or
X Press the ~ button on COMAND.
X To accept: confirm Accept by pressing the
9 button.
or
X Press the 6 button on COMAND.
i You can also accept the call by voice
command using Voice Control System (see
the separate operating instructions).
Once you have accepted the call, you can
conduct your telephone call using the hands-
free system. The call volume can be adjusted
(
Y
page 28). For more information, see the
"Functions during a single call connection"
section (
Y
page 101).
The display shows the phone number or the
name and phone number (if the entry is stored
in the address book) or shows the Call
from Unknown (phone number withheld)
message.
i You can also accept a call using the
6 button when COMAND is showing the
display of a different main function. The
display switches to the telephone display
after you accept the call. After the call is
finished, you see the display of the previous
main application again.
Making an outgoing call
Entering a telephone number using the
number keypad
X Call up the basic telephone menu
(
Y
page 99).
X
Enter the digits using the number pad.
X
To connect a call: press the 6 button
on COMAND.
Entering a telephone number using the
telephone basic menu
X Call up the telephone basic menu
(
Y
page 99).
X
Enter the required digits. Proceed as
described in the "Entering characters in the
address and phone books" section
(
Y
page 23).
X To connect a call: select ° in the
character bar and press the 9 button to
confirm.
Redials
X
Call up the basic telephone menu
(
Y
page 99).
100
Telephone operation
Tele
phone