Na vigation system, Additional settings – Mercedes-Benz CLS-Class 2011 COMAND Manual User Manual
Page 91

Compass function
You can see the current vehicle position and
direction of travel in the compass view.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press the 9 button.
X
Select
Position
in the navigation menu
bar using the :=; buttons and
press the 9 button to confirm.
X
Select
Compass
and press the 9 button to
confirm.
Depending on the previous state, switch
the option on O or off ª.
Example display: compass
:
Current direction of travel
;
Current height above average sea level
(rounded to the nearest 50m)
=
Current vehicle position: longitude
coordinates
?
Number of GPS satellites currently being
used
A
Current vehicle position: latitude
coordinates
B
Currently set steering angle of the front
wheels
i
To display current height ;, the system
must be able to receive at least four
satellites. Steering angle B can be a
maximum of 35° in both directions.
Updating the digital map
Introduction
The digital maps generated by the map
software become outdated in the same way
as conventional road maps. Optimal route
guidance can only be provided by the
navigation system in conjunction with the
most up-to-date map software.
Information about new versions of the digital
map can be obtained from an authorized
Mercedes-Benz Center. You can have your
digital map updated there with a DVD, or you
can update it yourself.
i
The update process can take a long time
(over an hour), depending on the size of the
map software. During this time, you will
only be able to switch on radio mode and
to accept incoming calls. The update will be
completed more quickly if the vehicle is
stationary.
If you carry out the update with the engine
switched off and the starter battery has
insufficient power, COMAND may
automatically switch off during the process
in order to protect the battery. If this
occurs, restart the update with the engine
running.
G
Warning!
Never run the engine in an enclosed space.
The exhaust fumes contain poisonous carbon
monoxide. Inhaling exhaust fumes is
hazardous to your health and can lead to loss
of consciousness and death.
Update process
X
Insert the DVD (
Y
page 129).
The update begins. COMAND checks
whether the digital map on the DVD is
compatible with the navigation system and
system software.
If this is the case and the DVD's map data
has not already been installed, the
COMAND starts updating the digital map.
Additional settings
89
Na
vigation
system
Z