Na viga tion syst em – Mercedes-Benz CLS-Class 2011 COMAND Manual User Manual
Page 81
X
Select the destination using the
9: buttons and press the 9 button
to confirm.
The destination address is shown.
X
Select
Save
and press the 9 button to
confirm.
You can now select storage options
(
Y
page 79).
Selecting storage options
X
To save the destination without a
name: select
Save Without Name
and
press the 9 button to confirm.
COMAND stores the destination in the
destination memory and uses the address
as the destination name.
X
To save the destination with a name:
select
Save With Name
and press the 9
button to confirm.
X
Select a category, e.g.
Home
, and press the
9 button to confirm.
The input menu appears with data fields
and the character bar.
Example display: saving a destination with a name
:
Selected data field with cursor
;
Character bar
X
Proceed as described under "Entering
characters" in the Entering characters in
navigation mode (entering a city)" section
(
Y
page 23).
X
Then select ¬ and press the 9 button
to confirm.
COMAND stores the destination under the
name entered.
Assigning a destination to an address
book entry
An address with complete address data that
is suitable for navigation can be assigned to
an already existing address book entry. You
can then later start route guidance to this
address straight from the address book
(
Y
page 113).
X
Select
Assign to Address Book Entry
and press the 9 button to confirm.
X
Select a category, e.g.
Home
, and press the
9 button to confirm.
You will see the address book either with
the character bar or as a selection list.
X
To select an address book entry:
proceed as described in the "Searching for
an address book entry" section
(
Y
page 110).
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
will appear asking whether you wish to
overwrite the existing data.
X
Select
Yes
or
No
and press the 9 button
to confirm.
If you select
Yes
, COMAND stores the data.
Deleting a destination or the home
address from the destination memory
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press the 9 button.
Destination memory
79
Na
viga
tion
syst
em
Z