Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 109)

will appear asking whether you wish to
overwrite one of the existing numbers.
X Select Yes or No and press the 9 button
to confirm.
If you select Yes , a selection list will appear
containing the five existing numbers.
If you select
No , the process will be
canceled.
X Select the number to be overwritten using
the 9: buttons and press the 9
button to confirm.
An input menu appears. The data field for
entering the new phone number is
highlighted.
X Enter characters and save the entry.
Proceed as described under "Entering
characters" in the "Entering characters in
the address and phone books" section
(
Y
page 22).
Using call lists
Introduction
When telephoning via the Bluetooth ®
interface, COMAND displays lists with calls
received (including the missed calls) or calls
made.
i The respective menu item can only be
selected if calls have already been made or
received in COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
These lists remain in COMAND, even after
another mobile phone has been connected.
Opening a call list and selecting an
entry
X Press the % function button.
X Select Call Lists in the telephone basic
menu using the :=; buttons
and press the 9 button to confirm.
A menu appears.
X Select Calls Received or Calls
Dialed using the 9: buttons and
press the 9 button to confirm.
The corresponding list appears.
Example display: list of calls received
:
List of incoming calls
; Date/time and phone number of the
selected entry
= To call up options
i You can also call up the list of dialed calls
by pressing the 6 button when the
telephone basic menu is shown. Doing so
displays only names or phone numbers
without a date or time.
X Select an entry using the 9:
buttons.
X To dial a phone number: press the 6
button.
X
To close the list: press the k button.
Displaying details about a list entry
COMAND can also show a shortened list entry
in full.
Using call lists
107
Telep
hone
Z