Telephone, Telephone operation – Mercedes-Benz CLS-Class 2011 COMAND Manual User Manual
Page 103
X
Select ° in the character bar and press the
9 button to confirm.
or
X
While the ° icon is highlighted, press the
6 button on COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
X
To select a call: press the 9 or :
button.
X
To connect a call: press the 9 or 6
button.
Connecting a call to an entry on a call
list or in the COMAND phone book
X
Call up a call list and select an entry using
the 9: buttons.
or
X
Call up the COMAND phone book and
select an entry using the 9:
buttons.
X
To connect a call: press the 9 or 6
button.
Functions available during a call
Overview
Telephone operation with a single call
:
Person you are calling
;
Icon for active telephone connection
=
To switch hands-free microphone on/off
?
To send DTMF tones (not possible with all
mobile phones)
A
Name of the mobile phone connected
B
To end a call
Switches the hands-free microphone
on/off
This function is also available during an active
phone call.
X
Call up the basic telephone menu
(
Y
page 99).
X
To switch off: select
Mic Off
and press
the 9 button to confirm.
If the microphone is switched off, the
display shows the Q icon and the
The
microphone is off
message appears for
a short period.
X
To switch on: select
Mic On
and press the
9 button to confirm.
The Q icon goes out. You will briefly see
the
The microphone is on
message.
Ends an active call
X
Select ¢ and press the 9 button to
confirm.
or
X
Press the ~ button on COMAND or on
the multifunction steering wheel.
Call waiting
i
The "call waiting" function must be
supported by the network provider and be
enabled.
If you currently have an active single-call
connection and receive a further call, the
phone number of the waiting call is entered
in the list of received calls. A tone sounds.
DTMF tone transmission
This function is not supported by all mobile
phones.
Telephone operation
101
Telephone
Z