Mercedes-Benz CLS-Class 2011 COMAND Manual - Manual (Page 74)

X Select Route in the navigation menu bar
using the :=; buttons and
press the 9 button to confirm.
X Select Route Browser and press the 9
button to confirm.
At the top of the display, you will see
information about the highlighted route
section, for example the distance to be driven
on the road and road designation. The
highlighted route section is marked in white
with a red border on the map.
X To view the next or previous route
section: select Next or Previous and
press the 9 button to confirm.
i If the first or last route section is
highlighted, you cannot select Previous or
Next .
X To zoom in or out of the map: select N
or M and press the 9 button to confirm.
X To close the route browser: select Back
and press the 9 button to confirm.
Off-road and off-map
Route guidance to an off-road
destination
G Warning
The COMAND navigation system may direct
you to off-road routes that your vehicle may
not be capable of traversing through without
damaging your tires, wheels or vehicle. It is
the driver’s sole responsibility to determine
the suitability of the route. Off-road routes
may be of varying conditions and their
appropriateness for use may be affected by
various factors such as time of day, time of
year and immediate weather conditions that
cannot be judged or taken into consideration
by the COMAND system.
COMAND can guide you to destinations
which are within the area covered by the
digital map, but which are not themselves
recorded on the map.
These destinations are known as off-road
destinations, which you can enter using the
map, for example. In these cases, COMAND
guides you for as long as possible with
navigation announcements and displays on
roads known to the system.
Example display: route guidance to an off-road
destination
:
Off-road destination
; Off-road section of the route
= Current vehicle position: the tip of the
triangle indicates the vehicle’s direction
of travel
? Off-road, no street names available
Shortly before you reach the last known point
on the map, you will see the Area of
destination reached message and an
arrow. The direction arrow shows the
compass heading to the destination.
Route guidance from an off-road
location to a destination
If the vehicle position is within the area
covered by the digital map, but the map does
not contain any information about that
location, the vehicle is in an off-road location.
COMAND is also able to guide you to a
destination even from an off-road location.
At the start of the route guidance, you will see
the Off Mapped Road message, an arrow
and the distance to the destination. The arrow
shows the compass heading to the actual
destination.
72
Route guidance
Na
vigation
system