Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 40)

To do so, use the special cordless head-
phones (
Y
page 239). Using the headphones
on the correct sides ensures an optimal
sound.
You can connect your own headphones to a
special headphones jack. You can use the
remote control to operate them.
Points to remember
R
You can only adjust the volume for the
headphones supplied, directly on the head-
phones.
R Only entertainment functions, i.e. audio,
TV, video and Internet, for example, may be
used with SPLITVIEW.
R Different media can be used on the driver
and front-passenger sides as long as they
use different media sources. Example: if a
medium from the single DVD drive is being
played on the driver's side, then another
medium that is also played from the single
DVD drive cannot be played separately on
the front-passenger side. However, other
media can be used at the same time on the
front-passenger side, including radio,
memory card, MUSIC REGISTER, Media
Interface, USB or AUX.
R If you use the same medium on both sides,
you can both carry out the respective set-
tings.
R Internet use is only available at any one
time to the driver or the front passenger.
A corresponding message appears on the
display.
R Internet can only be used, if it is set and
connected via a telephone on the driver's
side.
R
The multifunction steering wheel can only
be used for functions which relate to the
driver's side.
Switching SPLITVIEW on/off
Switching on SPLITVIEW
X Select System System in the main function bar by
turning c V d the COMAND controller and
press W to confirm.
X Select ; in the menu bar and confirm.
SPLITVIEW symbol : appears in the dis-
play and display ; switches to Off Off .
The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes previ-
ously, the display from the driver's side is
shown.
The front passenger can now call up the
COMAND functions with the remote con-
trol.
Switching off SPLITVIEW
X
Select ; in the menu bar by turning cVd
the COMAND controller and press W to
confirm.
SPLITVIEW symbol : disappears from the
display. Display ; switches to On On .
i If COMAND has already been switched
on, you can also use the remote control to
switch SPLITVIEW on and off. Make sure
that the SPLITVIEW symbol is set on the
remote control thumbwheel (
Y
page 237).
The SPLITVIEW display remains on for approx-
imately 30 minutes after the SmartKey has
been turned to position 0 in the ignition lock.
After this time or after the SmartKey has been
removed, the settings on the front-passenger
side are saved for approximately 30 minutes
38
SPLITVIEW
At
a
gla
nce