Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 117)

Defining an area for the first time
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X Select Navi Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X Select Avoid Area Avoid Area and press W to con-
firm.
If you have not previously blocked an area,
a menu appears.
X
Select Using Map Using Map , From Memory From Memory or From From
Personal POIs Personal POIs and press W to confirm.
If you select Using Map Using Map , the map with the
crosshair appears.
If you select
From Memory From Memory or From Per‐ From Per‐
sonal POIs sonal POIs , either the destination mem-
ory or the list of categories for POIs
appears.
R Destination memory (
Y
page 70)
R List of categories for personal POIs
(
Y
page 85)
X Select the desired destination or personal
POI and press W to confirm.
X
When the destination address is displayed,
select Continue Continue and press W to confirm.
The map appears.
The crosshair marks the center of the area
that is to be avoided.
X
To scroll the weather map: slide XVY,
ZVÆ or aVb the COMAND controller.
X To set the map scale: as soon as you turn
cVd the COMAND controller, the scale bar
appears. Turning clockwise zooms out from
the map; turning counter-clockwise zooms
in.
X
Turn cVd until the desired scale is set.
X
To apply a block: press W the COMAND
controller.
A red square appears on the map.
X
To adjust the size of the square: turn
cVd the COMAND controller.
The square is enlarged or reduced.
X
To confirm the settings: press W.
The list appears. The previously selected
area to be avoided has been added and
activated.
You can also determine additional areas to be
avoided (
Y
page 115).
Defining further areas
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X Select Navi Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select Avoid Area Avoid Area and press W to con-
firm.
If you have already selected one or more
areas to avoid, a list of areas appears.
Additional settings
115
Navi
ga
tio
n
Z