Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 152)

Changing the category of a telephone
number data field
X
Display details for an address book entry
(
Y
page 149).
X Select the telephone number data field.
X
Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
X Select Change Category Change Category and press W to
confirm.
X Select a number category, e.g. Home Home .
X Select a telephone category, e.g. Mobile Mobile .
X
If desired, select Preferred Preferred and press W
to confirm.
Depending on the previous status, switch
the option on O or off ª. The phone num-
ber is displayed as the first number in the
phone book and can be dialed immediately.
X Select Save Save and press W to confirm.
The new category is stored.
Calling a number stored in an entry
Prerequisites
The mobile phone must be connected via the
Bluetooth ® Interface (
Y
page 126).
Dialing a number
X
Display details for an address book entry
(
Y
page 149).
X Select the phone number data field by turn-
ing cVd the COMAND controller.
X
Press W the COMAND controller to con-
firm.
or
X Select the list symbol to the right of the
data field by sliding VY the COMAND con-
troller.
X
Press W the COMAND controller to con-
firm.
X Select Call Call and press W to confirm.
The phone makes the call. The display
switches to telephone mode.
Storing the phone number as a speed
dial number
X
Display details for an address book entry
(
Y
page 149).
X
Select the phone number data field by turn-
ing cVd the COMAND controller.
X Select the list symbol to the right of the
data field by sliding VY the COMAND con-
troller and press W to confirm.
X Select Speed Dial Speed Dial and press W to con-
firm.
You can now store the number in one of the
ten speed dial presets (
Y
page 142).
Starting route guidance to an entry
Address book entry with navigable data
This function is available as soon as you have
stored a destination in the destination mem-
ory (
Y
page 104).
X
Search for an address book entry with the
L symbol and select it from the list
(
Y
page 148).
X Display details for an address book entry
(
Y
page 149).
X
Select the address data field by turning
cVd the COMAND controller and press W
to confirm.
Route guidance begins.
or
X
Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
X
Select Navigate Navigate and press W to confirm.
Route guidance begins.
Address book entry without navigable
data
Route guidance can also be started for an
address book entry without the L symbol. If
the address data or designations do not
match the digital map, COMAND prompts you
to re-enter the address.
150
Using the address book
Telep
hone