Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 131)

Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
® audio
device) must support the Bluetooth ® version
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be con-
nected.
X
If the code is the same on both devices,
confirm Yes Yes by pressing W.
If you select Yes Yes , authorization is continued
and the mobile phone is connected.
If you select
No No , the process will be can-
celed.
X
Confirm the message on the mobile phone.
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth ® device name for
COMAND is MB Bluetooth MB Bluetooth .
Please note the following: some mobile
phones require that you establish the con-
nection to COMAND again once you have
entered the passkey (see the mobile phone
operating instructions). The mobile phone
cannot otherwise be authorized.
X Press the % function button on
COMAND.
X
Select Connect Device Connect Device from the tele-
phone basic menu by sliding V Æ and turn-
ing c V d the COMAND controller and
press W to confirm.
The Bluetooth ® telephone list appears.
X Select Connect via Phone Connect via Phone and press W
to confirm.
The message on the left appears.
X Start the Bluetooth ® search on the mobile
phone; see the mobile phone operating
instructions.
X Select COMAND ( MB Bluetooth MB Bluetooth ) on the
mobile phone.
X
Option 1: when requested to do so, enter
the passkey first on the mobile phone and
then in COMAND.
X
Option 2: confirm the displayed codes on
the mobile phone and in COMAND (Secure
Simple Pairing).
With both options, you see the prompt Do Do
you want to be you want to be
authorized? authorized? on the COMAND display.
X
If you select Yes Yes , the mobile phone will be
authorized. The messages Waiting for Waiting for
a Connection to// a Connection to//
dev.>… dev.>… and Connecting Bluetooth Connecting Bluetooth
Profiles... Profiles... are displayed. If the connec-
tion is successful, you see the telephone
basic menu and the connected mobile
phone is entered.
If you select
No No , the process will be can-
celed.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
Telephony via the Bluetooth ® interface 129
Tel
eph
on
e
Z