Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 29)

The COMAND controller can be:
R pressed briefly or pressed and held W
R turned clockwise or counter-clockwise
cVd
R slid left or right XVY
R slid forwards or backwards ZVÆ
R slid diagonally aVb
Example of operation
In the instructions, operating sequences are
described as follows:
X
Press the $ button.
Radio mode is activated.
X Select Radio Radio by sliding VÆ and turning
cVd the COMAND controller and press W
to confirm.
X Confirm Station List Station List by pressing W.
The station list appears.
Buttons on the COMAND controller
Overview
: Back button (
Y
page 27)
; Clear button (
Y
page 27)
= Seat function button (
Y
page 52)
? Favorites button (
Y
page 45)
If your vehicle does not have the seat function
button, it will have two Favorites buttons.
For AMG vehicles: the COMAND controller is
configured with the : and ; buttons.
Back button
You can use the k button to exit a menu or
to call up the basic display of the current
operating mode.
X To exit the menu: briefly press the k
back button.
COMAND changes to the next higher menu
level in the current operating mode.
X To call up the basic display: press and
hold the k back button.
COMAND changes to the basic display of
the current operating mode.
Clear button
X To delete individual characters: briefly
press the 2 clear button.
X
To delete an entire entry: press and hold
the 2 clear button.
Seat function button
You can use the T button to call up the
following seat functions:
R
Multicontour seat (with 4-way lumbar sup-
port)
R Active multicontour seat (dynamic seat and
massage function)
R
Balance (seat heating distribution)
Favorites button
You can assign predefined functions to
the ; favorites button and call them up by
pressing the button (
Y
page 45).
COMAND operating system
27
At
a
glance