Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 31)

Selecting a menu item
X Select the station by turning c V d the
COMAND controller and press W to con-
firm.
The station is set.
Basic COMAND functions
Switching COMAND on/off
X
Press the q control knob.
When you switch on COMAND, a warning
message will appear. COMAND calls up the
previously selected menu.
If you switch off COMAND, playback of the
current audio or video source will also be
switched off.
Switching the sound on or off
Audio/video source sound
X Press the 8 button on the COMAND
controller or on the multifunction steering
wheel.
The sound from the respective audio or
video source is switched on or off.
i When the sound is switched off, you will
see the , symbol in the status bar. If you
change the audio or video source or change
the volume, the sound is automatically
switched on.
i Even if the sound is switched off, you will
still hear navigation system announce-
ments.
Switching off navigation announce-
ments
X
Navigation announcements: press the
8 button during the announcement.
Switching navigation announcements
back on
X Press the 8 button again.
The navigation announcements are active
again:
R
if COMAND is switched off/on with the
q control knob
R or after starting route guidance
Adjusting the volume
Adjusting the volume for the audio or
video source
X
Turn the q control knob.
or
X
Press the W or X button on the mul-
tifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the fol-
lowing:
R Navigation announcements
R Phone calls
R Voice output of the Voice Control System
(see the separate operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
X
Turn the q control knob.
or
X Press the W or X button on the mul-
tifunction steering wheel.
Basic COMAND functions
29
At
a
gla
nce