Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 142)

X Select Yes Yes or No No and press W to confirm.
If you select Yes Yes , a selection list will appear
containing the five existing numbers.
If you select
No No , the process will be can-
celed.
X
Select the number to be overwritten by
turning cVd the COMAND controller and
press W to confirm.
An input menu appears. The data field for
entering the new phone number is high-
lighted.
X Enter characters (
Y
page 33)
X
Store the entry (
Y
page 34)
Using call lists
Introduction
While the telephone is being used, COMAND
stores individual lists for both incoming and
outgoing calls (including missed calls). Call
lists are not available unless a mobile phone is
connected to COMAND.
COMAND supports the PBAP Bluetooth
® pro-
file. How COMAND processes call lists
depends on the model of the mobile phone
connected:
R Bluetooth ® telephone with PBAP Blue-
tooth ® profile:
The call lists are downloaded automatically
from the mobile phone by COMAND as
soon as the mobile phone is connected to
COMAND.
R Bluetooth ® telephone without PBAP Blue-
tooth ® profile:
COMAND creates the call lists from both
incoming and outgoing calls (including
missed calls) as soon as the mobile phone
is connected to COMAND.
i For Bluetooth ® telephones without the
PBAP Bluetooth ® profile, the call lists in
COMAND are not synchronized with those
on your mobile phone. These calls may or
may not be listed on your mobile phone,
depending on the model.
i If no mobile phone is connected, then the
Call Lists Call Lists menu item is grayed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND, the previously available call lists
and their entries will be deleted automati-
cally. They are still available on the mobile
phone itself.
i You will only be able to select the respec-
tive menu items once calls have been
received or dialed from COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry
X Press the % function button.
X Select Call Lists Call Lists in the telephone basic
menu by sliding VÆ and turning cVd the
COMAND controller and press W to con-
firm.
A menu appears.
X
Select Calls Received Calls Received or Calls Dialed Calls Dialed
by turning cVd and press W to confirm.
The corresponding list appears.
i You can also call up the list of dialed calls
by pressing the 6 button when the tele-
phone basic menu is shown. In this case,
the list will only show phone numbers.
X
Select an entry by turning cVd the
COMAND controller.
X To dial a phone number: press W.
X To close the list: select the & symbol
and press W to confirm.
or
X Press the k back button.
140
Using call lists
Tel
epho
ne