Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 144)

i Save Save is shown in gray if the selected list
entry has already been saved.
X
Select Add Phone No. Add Phone No. and press W to
confirm.
X Select a category for the number, e.g. Home Home ,
and press W to confirm.
X
Select a category for the phone, e.g.
Mobile Mobile , and press W to confirm.
X Select Save Save .
The search menu for address book entries
appears.
X Search for the desired entry (
Y
page 137).
X Press W when you have finished searching.
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
You will see a message to this effect.
If five numbers are stored for the entry you
are searching for, a prompt will appear ask-
ing whether you wish to overwrite one of
the existing numbers.
X
Select Yes Yes or No No and press W to confirm.
If you select Yes Yes , a selection list with the
five existing numbers is displayed.
If you select
No No , the process will be can-
celed.
X Select the number to be overwritten in the
list by turning cVd the COMAND controller
and press W to confirm.
COMAND overwrites the selected number
with the new data.
Deleting call lists
If you are using a Bluetooth ® phone that does
not support the PBAP Bluetooth ® profile, the
call lists are generated and managed by
COMAND. You can delete these call lists in
COMAND.
If you download call lists from a Bluetooth
®
phone that supports the PBAP Bluetooth ®
profile, you cannot delete them from
COMAND.
X Select Call Lists Call Lists in the telephone basic
menu by turning cVd the COMAND con-
troller and press W to confirm.
X Select Delete Call Lists Delete Call Lists and press W
to confirm.
A prompt appears asking whether you wish
to delete all call lists.
X
Select Yes Yes or No No and press W to confirm.
If you select Yes Yes , the call lists are deleted.
If you select No No , the process will be can-
celed.
i If you delete these call lists from the
mobile phone (see the separate mobile
phone operating instructions), COMAND
updates the call list display the next time it
connects.
Using the speed dial list
Storing an entry
You can assign ten speed dial presets (0 – 9)
to the speed dial list. There are two options
available for this purpose.
Option 1:
X
Search for a phone book entry in the phone
book (
Y
page 137).
X If an entry has several phone numbers,
select the desired number by turning cVd
the COMAND controller.
X Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
A menu appears.
X Select Speed Dial Speed Dial by turning cVd the
COMAND controller and press W to con-
firm.
A menu appears.
142
Using the speed dial list
Telephone