Losi LOSB9567 User Manual
Page 4
LOSB9501 Xcelorin Electronic Speed Control v1.0
Page 4
A key feature is the three (3) stored settings within the ESC that are easily
recalled for convenient use. These stored settings are referred to as “profiles.”
These do not limit the functions of the ESC as you can easily use the included
Quick Programming Card (QPC) to make changes to any desired setting.
The Low Voltage Cutoff (LVC) is preset for a 3S 11.1V Lithium Polymer (LiPo)
battery. It can be changed to support 2S LiPo and NiMH batteries. Using the
Quick Programming Card (QPC), adjustments to the ESC can be made quickly
and simply.
The Xcelorin Rock Crawler ESC has no delay between forward and reverse to
allow you to catch yourself if you get into trouble on the rocks. At higher wheel
speeds this can place an incredible strain on your drivetrain. Be sure your
equipment can handle these loads before going from forward to reverse
instantly at higher wheel speeds. It is not recommended to repeatedly go from
full forward to reverse as this creates large currents that can eventually lead to
damage of the ESC.