Losi LOSB9567 - Manual (Page 36)

LOSB9501 Xcelorin Electronic Speed Control v1.0 Page 36
Legacy or 2.4GHz – This setting is intended to reflect what type of Radio
System you are using, i.e. Transmitter and Receiver.
Default is 2.4GHz. If you use a traditional radio, like a 27MHz, 40MHz or 75MHz system,
you can select the Legacy setting.
The Electronic Speed Control internal switching rate is increased with the 2.4GHz selection
and may cause interference with Legacy Radio Systems.
Neutral Deadband – This setting is disabled for crawler use.
Reverse Rotation – If your vehicle requires that the motor spin in the
opposite direction, set this setting to On.
For optimal performance, ensure the timing on your motor is set to 0 degrees advance. If
you cannot set the timing on your motor and it is not set to 0 degrees from the factory,
you may notice that the vehicle has more power in reverse and runs a bit hotter. This is
normal as the timing advance creates more power in the normal direction of rotation
(which would be reverse when this setting is set to On).
Throttle TAB information
Setting Throttle Profile – This feature is disabled for crawler use.
Brake TAB information
Setting Brake Profile – This feature is disabled for crawler use.