Losi LOSB9567 User Manual
Page 34
LOSB9501 Xcelorin Electronic Speed Control v1.0
Page 34
Reverse Throttle Limit - Use this to limit the power available using reverse
throttle. The lower the percent or level the less speed will be available in
reverse.
Motor Timing - This option is disabled for crawler use.
Initial Acceleration - Use this to limit the initial power sent to the motor when
starting from a complete stop.
Using the LOW option, the vehicle will launch very slowly and provide the longest run
times. When using the HIGH choice, you will have wheel-spinning acceleration at the cost
of run time. This is also very tough on the batteries as the amperage draw can be very
high. If your vehicle cuts out, hesitates or loses radio control, you should consider setting
this at a lower value.
•
Low Using this option will provide longer run times and is easiest on the
batteries. It is a good choice for beginners.
•
10%
10% of reverse speed
•
60%
60% of reverse speed
•
20%
20% of reverse speed
•
70%
70% of reverse speed
•
30%
30% of reverse speed
•
80%
80% of reverse speed
•
40%
40% of reverse speed
•
90%
90% of reverse speed
•
50%
50% of reverse speed
(Default)
•
100%
100% of reverse speed