Kontron VM162 - Manual (Page 99)

Appendix Bootstrap Loader
Juli 23, 1997 Page BOOT- 7 © PEP Modular Computers
4 Command Reference
4.1 Boot Wait
Syntax
bw []
Description
Without parameters, bw displays the current setting.
For 1, 2, 5, 10, 20 and 50 may be specified as time in seconds. Other values are not supported.
4.2 Load Flash
Syntax
If [-ol=]] [-u] [-q] [-c] [-m[=] -I[=]
Description
Without parameters, the FLASH is loaded using S-records over the term port.
'' is a signed 32 bit offset which is added to every record and can be used to move the S-records to the FLASH po-
sition.
Note:This ontion must be used if 51 or S2 records are used.
'-u' must be used to download over ser0.
'-q' suppress all messages except error messages.
'-c' clears all untouched sectors and leaves no old code fragments.
For a Load Flash from an absolute address, the -m / -I options must be used.