3 si6-10bt, 1 specifications, 2 connector – Kontron VM162 User Manual
Page 88: Appendix si6 piggybacks, 3si6-10bt, 1 specifications 3.2 connector
Appendix SI6 Piggybacks
Page SI6- 4
© PEP Modular Computers
Juli 23, 1997
3
SI6-10BT
The SI6-10BT is a physical twisted pair (10BaseT) interface to the 68EN360 Controller chip. It connects one of the range
of PEP CPU boards to an unshielded 100
Ω
twisted pair cable via an RJ45 telephone jack.
The SI6-10BT has two LEDs fitted; a red LED indicates collision detection and a yellow LED for data.
3.1 Specifications
3.2 Connector
On-board termination
Max. Baud Rate
100
Ω
10 Mbit/s as specified by Ethernet
Pin No.
Signal
1
TD+
2
TD+
3
RD+
4
Not connected
5
Not connected
6
RD-
7
Not connected
8
Not connected
Col Tx
10BaseT
ETHERNET
Collision
Data
RJ45 Connector
Pin 1
Pin 8
This manual is related to the following products: