EFCO 8800 Series Assembly Instructions Vol.1 - Manual (Page 16)

EFCO 2009 Page 16
Series 8700 / 8800 Unitized Curtain Wall Assembly Instructions - Volume 1
Section 2 - Parts Identification : D. Frame Extrusions - 8" System
Profile Part # Description Tooling/Cut Length Formula
Frame Extrusions - 8" System
17H0
8" CAPTURED AND SSG HORIZONTAL
STACK SILL CUT TO LENGTH (D.L.O.) AT
TYPICAL FLAT UNITS
17H3
8" CAPTURED AND SSG HEAD
HORIZONTAL CUT TO LENGTH (D.L.O.) AT
TYPICAL FLAT UNITS
17H4
8" CAPTURED AND SSG HEAD
HORIZONTAL FILLER CUT TO LENGTH (D.L.O.)
MINUS .031 AT TYPICAL FLAT UNITS
1H62 8" STATIC STARTER SILL U4G99-001, U4G99-002
17H9
FABRICATED #
FM02, FM26-
FM29
8" GUTTER BASE MULLION ANCHOR
REFERENCE FM02, FM26-FM29
PART DRAWINGS
FM13 - 8" VERTICAL MULLION SPLICE
BAR (RIGHT)
FM14 - 8" VERTICAL MULLION SPLICE
BAR (LEFT)
REFERENCE FM15 AND FM16 PART
DRAWING
17E4
FABRICATED #
FM15 & FM16