AVer SEB5116 series - Manual (Page 94)

88
6.1.1.5 Network Setup
i
SEB5108H series only has 8 channels will be available.
(1)
(2)
(3)
(4)
(5)
(1) Transmitting Camera
Select the camera to disable/enable camera can be view from remote site.
(2) Network Type
Select the IP Mode
– Static IP, DHCP, or PPPOE
- Static IP: Assign a fixed and global IP address for the DVR system
 IP: Assign a constant IP address which real IP addresses from ISP.
 Mask: Enter the subnet mask of the IP address which user has assigned to DVR
system.
i
It is a bitmask used to tell how many bits in an octet(s) identify the sub network, and how
many bits provide room for host addresses.
 Gateway: Enter the network gateway IP address
 DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. It will translate the domain name into IP address when DVR system request.
- DHCP: Assign the IP address by local DHCP server to DVR system.
i The Dynamic Host Configuration Protocol (DHCP) is a set of rules used by a
communications device (such as a computer, router or networking adaptor) to allow the
device to request and get an Internet address from a server which has a list of addresses
available for assignment.
- PPPOE
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP frames in
Ethernet frames. It is used mainly with ADSL services.
 User ID & Password: fill in the user account and password that user applied from your