AVer SEB5116 series - Manual (Page 25)

19
1.6 Familiarizing the Remote Control Buttons
Use the Remote control to operate the DVR unit.
Name Function
(1)
Switch to playback mode. Press again to switch back
to preview mode.
(2) Start recording video. Press again to stop recording.
(3) To call out setup menu in preview mode/playback
mode.
(4)
To rewind the recorded video. While rewinding, user
can press
to adjust the play speed (1x, 2x,
4x, 8x, 16x, 1/16x, 1/8x, 1/4x, 1/2x). Press
twice can back to 1x play speed.
(5)
To start playback or back to 1x play speed.
To pause playback.
(6) Adjust play speed(1x, 2x, 4x, 8x, 16x, 1/16x, 1/8x,
1/4x, 1/2x)
(7) To select the time and date of playback file
(8)
Set a playing recorded video from A point to B point
segment and repeat playing on surveillance screen.
Press
can stop AB segment playback.
(9) To backup recorded video file to USB pen drive.
(10)
Press to reset the alarm when there is an alarm event
occurred.
(11)
Switch to PTZ mode. Press + channel
number ( ~ ) can switch to PTZ control
mode if the selected camera is a PTZ camera and the
PTZ function is enabled.
Name Function
(12)
A functional key for multiple system function control
- Press to enable FN modes (The word “FN” will show up in
the left bottom corner of screen).
- To exit FN modes, press again.
+ : Switch to single screen display mode
+ : Switch to QUAD display mode
+ : Switch to 9 spilt screen display mode
+ : Switch to 16 spilt screen display mode
+ : Switch to one single and 7 + 1 spilt screen display
mode