AVer SEB5116 series - Manual (Page 88)

82
- Pre Record Time: set the time in second for the DVR system to pre-recording before the
alarm happen.
After Record Time: set the time in second for the DVR system to continue recording after
the alarm has ended.
(4) Record Schedule
By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the
table below to customize the recoding condition.
Condition Description
None Disable video recording
Always Record Record non-stop
Motion Record Start recording when any movement is detected
Smart Record
Automatically switch to recorded at the maximum frame rate setting once a motion
is detected and if there is no motion, it records at the minimum frame rate setting.
Sensor Record Start recording when the sensor has triggered
Click Schedule to setup record schedule. Click the type of schedule and select hour (00~23)
and click OK to complete the schedule setting.