Appendix c installing 3rd and 4th hard disk, Appendix c installing 3, And 4 – AVer SEB5116 series User Manual
Page 113: Hard disk
107
Appendix C Installing 3
rd
and 4
th
Hard Disk
i
Before install 3
rd
and 4
th
hard disk, please make sure to purchase the 90W power adaptor.
Please refer to the below steps to install 3
rd
and 4
th
hard disk.
1. Loosen all screws (2 sides and back)
2. Push the cover backward and lift to open the
case cover.
3. Loosen the screws of holder to make hard disk
install more easily.
4. Unplug the power cables and SATA cables of 2
HDD.
5. Loosen all the screws of hard disk plate. And
then, take out the HDD plate from the DVR unit.
6. Place the 3
rd
hard disk on the hard disk plate.
This manual is related to the following products: