AVer SEB5116 series - Manual (Page 69)

63
- PTZ Preset Point
Position the PTZ camera based on the preset point setting.
1. Next to the PTZ preset point check box, click Detail.
2. In the Alarm PTZ window, select the PTZ camera number in Select Camera. And then,
mark the Enable check box.
3. In Alarm Trigger and Alarm Close, select the position of the PTZ camera when the
alarm is activated and ended. For the PTZ camera ended point, user also can select one
preset position or Auto Path between preset position groups.
i
SEB5108H series only has 8 channels will be available.
- Alarm SOP
Define the Standard Operation Procedure that SOP dialog will appear when alarm is
occurred.
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is activated.
i
SEB5108H series only has 8 channels will be available.