AVer SEB5116 series - Manual (Page 66)

60
- Enlarge Camera View
Switch to only display video in preview mode from where the alarm is activated.
a. Select the camera from drop down list to specify which camera video to be enlarged on
screen when the alarm is triggered.
 Alarm Camera: when a channel has an alarm occurred, and then, the channel video
that has an alarm occurred will be enlarged on screen.
 Camera # (1~16): the selected channel video that will be enlarged on screen when an
alarm is activated.
b. Retrieve time: set the waiting duration before system switching back to original Preview
mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch
back to Preview mode manually.
- Relay Output
Set to enable/disable the relay operation when the alarm is activated and to extend additional
time in second before it stops the relay operation. In the Alarm Relay dialog box, mark from
the available relay list; set to enable/disable the relay operation when the alarm is activated.
Set the Retrieve time, you may to extend the relay operation time and set the duration in
second. Click OK to exit and accept the setting and Cancel to exit without saving the setting.