AVer SEB5116 series - Manual (Page 60)

54
- Smart Record
Automatically switch to recorded at the maximum frame rate setting once a motion is
detected and if there is no motion, it records at the minimum frame rate setting. Set the
maximum frame rate setting in Chapter 3.3 Recording Setup .
- None
The system won’t do any recording.
5. After select the record mode, click the specific schedule block or click All to select all. To
un-select the specific schedule blocks, select None and click blocks to un-select. Click Clear
will un-select all schedule block.
6. To store the setting, click Save.
7. To end setting, click OK to exit and accept the setting and Cancel to exit without saving the
setting.
3.4.3 Setup Holiday Schedule
Setup record status for the specific holiday.
To Set the Recording Schedule:
1. Click
> Schedule > Holiday tab.
2. Select the Priority of holiday schedule. If the schedule has a conflict, system will follow the
priority that user has choice.
- Date: the specific date that user has setup will be the first priority if the schedule has a
conflict.
- Weekly: the selected week time will be the first priority if the schedule has a conflict.
3. To set a specific date, mark the check box and click the year, month or date column to select the
date and select the Record Status (ON/OFF). ON means the DVR system will record on the
holiday that has been set. OFF means the DVR system will not record on the holiday that has
been set.