AVer SEB5116 series - Manual (Page 114)

108
7. Turn the plate and hard disk over carefully and
screwed the hard disk on the plate. If hard disk
cannot be fit to the screw hole, then, you may
adjust the hard disk position to fit the screw hole.
8. Plug the SATA cable into SATA connector on the
PC board
9. Plug the power cables and SATA cables into all
three hard disk. User can unplug the SATA cable
of the left side HDD for screwing plate inside the
DVR more easily later.
10. Screw the plate within hard disk inside the DVR
unit.
11. If user wants to install 4
th
HDD, then follow the steps to continue. Otherwise, go to the last two steps to
complete the installation.