Dell KVM 1081AD/ KVM 2161AD - Manual (Page 115)

Terminal Operation xxx | xxx 107
Firmware Management
This menu contains the Flash Download selection. For more information, see
"Tools - Rebooting and Upgrading" on page 65.
Enable Debug Messages
This menu option turns on console status messages. Because this can
significantly reduce performance, only enable debug messages when instructed to
do so by Technical Support. When you are finished viewing the messages, press
any key to exit this mode.
Set/Change Password
This menu option allows enabling and disabling of serial port security, which
locks the serial port with a user-defined password.
Restore Factory Defaults
This menu option will restore all switch options to the default settings.
Reset Switch
This menu option allows you to execute a soft reset of the SCS.
Set Web Interface Ports
The SCS uses ports 80 and 443 for HTTP and HTTPS port numbers,
respectively. The user can modify or specify alternate ports.
NOTE: A reboot of the SCS is required to use new port numbers.
Exit
This menu selection will return you to the ready prompt. If the Console menu
interface password is enabled, you must exit the Console Main menu so that the
next user will be prompted with the Password login screen.