Dell C2660dn Color Laser Printer - Manual (Page 181)

The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer. You can also change the status of the printer to the standby mode by pressing any button on the operator
panel.
If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the
printer back on, physically turn the power switch of the printer to On.
Auto Reset
Purpose:
To automatically reset the settings to the default settings and return to the standby mode after you do not specify
any settings for the specified time.
Values:
45sec *
1min
2min
3min
4min
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is
cancelled if the time-out time is exceeded.
Values:
Off Disables the fault time-out.
On * 60 seconds *
Available Range:
3-300 seconds
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Date & Time
Purpose:
To specify the date and time formats.
Values:
Set Date & Time Time Zone Sets the time zone.
Date Sets the date depending on the Date Format settings.
Time Sets the time.
Date Format Sets the date format.
Time Format 12H Sets the time in 12-hour format.
24H * Sets the time in 24-hour format.
Understanding the Printer Menus 179