Dell C2660dn Color Laser Printer - Manual (Page 49)

Operator Panel
Auto SSID Setup
1 Press the (Menu) button.
2 Press the button until Admin Settings is highlighted, and then press the (Set) button.
3 Press the button until Network is highlighted, and then press the (Set) button.
4 Press the button until Wireless is highlighted, and then press the (Set) button.
5 Press the button until Wireless Setup is highlighted, and then press the (Set) button.
The printer automatically searches the access points on wireless network.
6 Press the button until the desired access point is highlighted, and then press the (Set) button.
If the desired access point does not appear, go to "Manual SSID Setup."
NOTE: Some hidden SSID may not be displayed. If the SSID is not detected turn on SSID broadcast from the router.
7 Enter the WEP key or pass phrase.
When the encryption type of the selected access point is WEP in step 6:
• Enter the WEP key, and then press the
(Set) button.
When the encryption type of the selected access point is WPA, WPA2 or Mixed in step 6:
• Enter the pass phrase, and then press the
(Set) button.
8 The Restart System screen appears.
9 Turn off the printer, and turn it on again to apply the settings.
Wireless LAN connection setting is complete.
Manual SSID Setup
1 Press the (Menu) button.
2 Press the button until Admin Settings is highlighted, and then press the (Set) button.
3 Press the button until Network is highlighted, and then press the (Set) button.
4 Press the button until Wireless is highlighted, and then press the (Set) button.
5 Press the button until Wireless Setup is highlighted, and then press the (Set) button.
6 Press the button until Manual Setup is highlighted, and then press the (Set) button.
7 Enter the SSID, and then press the (Set) button.
8 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
the (Set) button.
If you select Infrastructure, proceed to step 9.
If you select Ad-hoc, proceed to step 10.
Installing Optional Accessories 47