Dell C2660dn Color Laser Printer - Manual (Page 157)

Reset Defaults Initializes the system parameters.
Initialize Print Meter Click Initialize Print Meter to initialize the Print
Meter.
Non-Dell Toner On Enables the use of another manufacturer's toner
cartridge.
Off Disables the use of another manufacturer's toner
cartridge.
Adjust Altitude 0 meter
1000 meters
Sets the altitude of the location where the printer
is installed.
2000 meters
3000 meters
Apply New Settings After you change the settings, click this button to
apply the changes.
Restart printer to apply new settings Click this button to apply the changes.
Tray Settings
Purpose:
To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feeder
respectively.
Values:
Tray Settings MPF Mode Panel Specified Sets whether the paper size and paper type for the
Driver Specified
MPF are specified from the printer driver or the
operator panel.
MPF Display
Popup *1
On
Off Displays a popup message that prompts the user to
set Paper Type and Paper Size when the paper is
loaded in the MPF.
MPF Paper Size *1 Use Driver Settings Sets the size of paper loaded in the MPF.
A4 (210x297mm)
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Envelope #10 (4.1x9.5")
Monarch Env. (3.9x7.5")
DL Env. (110x220mm)
C5 Env. (162x229mm)
Custom Size
MPF Custom Size ­
Y *1
Available Range:
127–355 mm (5.0–14.0 inches)
Sets the length of custom size paper loaded in the
MPF.
MPF Custom Size ­
X *1
Available Range:
77–215 mm (3.0–8.5 inches)
Sets the width of custom size paper loaded in the
MPF.
MPF Paper Type *1 Plain Sets the type of paper loaded in the MPF.
Understanding the Tool Box Menus 155