Dell C2660dn Color Laser Printer User Manual
Page 182

Audio Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
Control Panel
Off
*
Does not emit a tone when the operator panel input is correct.
On
Emits a tone when the operator panel input is correct.
Invalid Key
Off
*
Does not emit a tone when the operator panel input is incorrect.
On
Emits a tone when the operator panel input is incorrect.
Machine Ready
Off
Does not emit a tone when the printer is ready to process a job.
On
*
Emits a tone when the printer is ready to process a job.
Job Completed
Off
Does not emit a tone when a job is complete.
On
*
Emits a tone when a job is complete.
Fault Tone
Off
Does not emit a tone when a job ends abnormally.
On
*
Emits a tone when a job ends abnormally.
Alert Tone
Off
Does not emit a tone when a problem occurs.
On
*
Emits a tone when a problem occurs.
Out of Paper
Off
Does not emit a tone when the printer runs out of paper.
On
*
Emits a tone when the printer runs out of paper.
Low Toner Alert
Off
Does not emit a tone when a toner is low.
On
*
Emits a tone when a toner is low.
Auto Clear Alert
Off
*
Does not emit a tone 5 seconds before the printer performs auto clear.
On
Emits a tone 5 seconds before the printer performs auto clear.
All Tones
Off
*
Disables all the alert tones.
On
Enables all the alert tones at once.
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)
*
Selects millimeter as the default measurement unit.
Inches (")
Selects inch as the default measurement unit.
NOTE:
The default for
mm/inch
varies depending on other settings, such as
Country
and
Document Size
.
Default Paper Size
Purpose:
To specify the default paper size.
Values:
mm series
A4
*1
Letter
Understanding the Printer Menus
180