Dell C2660dn Color Laser Printer - Manual (Page 170)

Add-CR The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job that does not specify a print mode.
Values:
Black * Prints in the black and white mode.
Color Prints in the color mode.
Ignore FormFeed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
Off * Disables the Ignore Form Feed feature.
On Enables the Ignore Form Feed feature.
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Quantity
Purpose:
To specify the number of copies to print.
Values:
1 * Sets the value in increments of 1.
Available Range: 1–999
2 Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Value:
1 Sided * Prints on one side of a sheet of paper.
Flip on Long Edge Prints on both sides of a sheet of paper to be bound by long edge.
Flip on Short Edge Prints on both sides of a sheet of paper to be bound by short edge.
Understanding the Printer Menus 168