Dell PowerEdge 2550 - Manual (Page 82)

Back to Contents Page
Figures
Dell™ PowerEdge™ 2550 Systems Installation and Troubleshooting Guide
Figure 2-1. Back-Panel Features
Figure 2-2. Front-Panel Features
Figure 3-1. Hard-Disk Drive Indicators
Figure 6-1. NIC Connector
Figure 7-1. Opening the System Doors
Figure 7-2. Removing the System Bezel
Figure 7-3. Removing the Expansion-Card Cage
Figure 7-4. Inside the System
Figure 7-5. Power Supply Features and Removal
Figure 7-6. Removing the Cooling Fan Assembly
Figure 8-1. System Board Features
Figure 8-2. Riser-Board Expansion-Card Connectors
Figure 8-3. Installing an Expansion Card
Figure 8-4. Memory Module Sockets
Figure 8-5. Installing a Memory Module
Figure 8-6. Removing a Memory Module
Figure 8-7. Retention Clip
Figure 8-8. Removing the Microprocessor
Figure 8-9. Pin-1 Identification
Figure 8-10. Installing the Microprocessor Chip
Figure 8-11. Installing the Heat Sink
Figure 8-12. Installing the VRM
Figure 8-13. Installing the RAID Hardware Key
Figure 8-14. Installing the RAID Battery
Figure 8-15. Installing the Battery
Figure 9-1. Peripheral Bay Hardware
Figure 9-2. Connectors on the Interposer Board
Figure 9-3. Installing a Drive in the Peripheral Cage
Figure 10-1. Hard-Disk Drive Hardware
Figure 10-2. Removing a Hard-Disk Drive Lock
Figure 10-3. SCSI Hard-Disk Drive Carrier
Figure 10-4. Installing a Daughter Card
Figure A-1. Example Jumpers
Figure A-2. Example Switches
Figure A-3. System Board Jumpers
Figure A-4. Connectors on the SCSI Backplane Board
Figure A-5. Connectors on the Interposer Board
Back to Contents Page