Dell PowerEdge 2550 - Manual (Page 43)

Select
The Select option in the Device Groups menu allows you to choose one or more devices from a particular device group.
Config
Choosing Config from the Device Groups menu displays information about the particular device that is highlighted.
Error Messages
When you run a test in the diagnostics, error messages may result. Record the messages on a copy of the Diagnostics Checklist; see " Getting Help " for
instructions on obtaining technical assistance and informing the technical assistance representative of these messages.
Back to Contents Page
Option Possible Values
Number of Times to Repeat Test(s) 0001 through 9999 or 0000, which loops indefinitely until you press . The default is 0001.
Maximum Errors Allowed 0000 through 9999, where 0000 means that there is no error limit. The default is 0001.
Pause for User Response Yes, No
Allows you to decide whether tests will wait for user input.
The default is Yes to wait for user input.
Message Logging None, Errors, All
Determines if any test results are saved to a file. The default is None.
Message Logging File Name Specifies the name of the logging file if the Message Logging option is selected. The default is A: RESULT.