Dell PowerEdge C8000 - Manual (Page 216)

216 Installing System Components
6 Remove the twenty screws securing the backplane cage and pull it out of
the server enclosure. See Figure 3-20.
Figure 3-20. Removing and Installing the Backplane Cage
Installing the Backplane/Fan Bay Cage
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Slide the new backplane cage into the enclosure until it is fully seated.
See Figure 3-20.
2 Secure the backplane cage to the enclosure with the twenty screws.
See Figure 3-20.
1 server enclosure 2 screws (20)
3 backplane cage
1 2
3