Dell PowerEdge C8000 - Manual (Page 211)

Installing System Components 211
Fan Controller Board
Removing the Fan Controller Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Loosen the two thumbscrews that secure the fan controller board tray to
the server enclosure. See Figure 3-16.
2 Pull out the fan controller board tray from the enclosure.
3 Remove the four screws securing the fan controller board.
4 Remove the fan controller board from its tray. See Figure 3-16.
Figure 3-16. Removing and Installing the Fan Controller Board
1 fan controller board 2 screws (4)
3 thumbscrews (2) 4 fan controller board tray
1
2
3
4