Dell PowerEdge C8000 - Manual (Page 200)

200 Installing System Components
Figure 3-8. Removing and Installing a Power Sled
Installing a Power Sled
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Orient the sled so that the release latch is at the bottom of the sled.
See Figure 3-8.
2 Slide the new sled into the enclosure until the sled is fully seated and the
release latch snaps into place. See Figure 3-8.
1 release latch 2 handle
1
2