Dell PowerEdge C8000 - Manual (Page 112)

112 Using the System Setup Program
IPv6 Mode
Select Enabled in the IPv6 Mode option and press to view the
following screen.
IPv6 Mode
Gateway MAC Address Sets the MAC address for the static IP address.
BMC NIC MAC
Address
Sets the MAC address for the BMC management port.
IPv6 Mode
(Disabled default)
Enables or disables the IPv6 internet protocol support.
If set to enabled, configure the IPv6 prefix, IP and gateway
addresses.
Option Description
IPv6 AutoConfig Enables or disables IPv6 auto configuration.
Option Description