Dell PowerEdge C8000 - Manual (Page 237)

Rack Mount Configuration 237
Connecting the Power Cables
This section includes instructions on how to connect the server enclosure
with internal or external power source to an external PDU.
Connecting the Power Cables to the Server Enclosure with Internal
Power Source
1 On the back of the server enclosure, connect the power cables to the AC
power sockets. See Figure 4-13.
Figure 4-13. Connecting the Power Cables to the Server Enclosure with Internal Power
Source
2 Plug the other end of the power cables into a grounded electrical outlet or
a separate power source such as an uninterrupted power supply or the
PDU. For instructions on how to connect the power cables to the rack
PDU, see "Connecting the Server Enclosure to a Rack PDU" on page 239.
1 AC power sockets (2) 2 power cables (4)
1
2